Panic Bars for your Commercial Property
If you own a public commercial building then it might be essential for you to own a panic hardware one of your doors to help protect your business. This is in order for you to provide acceptable emergency services for anyone in the facility.
So, people can make a fast exit in case of an urgent situation, a panic bar that you can push through is best used on every exit door that your commercial business has. There has to be an uninterrupted and unobstructed outlet to a safe area in your business that you can get out of. A lot of times these panic bars depending on the business-like restaurants, malls, bars and sometimes schools are apart of the law, and someone has to use them. So, if you don’t know the laws in your area then you should probably check to make sure that you’re up to code.
Panic hardware normally has a latching device with a crossbar and a touchpad that goes across at least half the width of the door, whenever it pushed it’s open and it releases. This hardware has to be required by code when it’s applied, to help make it possible for a specific number of people to leave quickly. Panic hardware can also be referred to as “crash bar” or “exit device” and is even sometimes called a “fire exit hardware.”
There are several different kinds of panic bars for commercial use because there are different uses for each panic device that you will use to help ensure that your commercial business stays safe and secure.
A single action lock is one of these kinds of locks used to assist businesses who want to stay safe and secure. Single action locks are used in such places like child care centers, old age homes, offices, hospitals and more, and it’s because they act like an unlocked for the people on the inside to exit. Which means, it’s easier to exit these doors in a panic situation. They are also easier to install than most other locks because they are activated from the inside.
Similar to the average panic bar or crash bar they are both easy to operate and are simply activated by just pushing down to open the door during an event including a fire or an emergency. Panic bars or crash bars work to burst open a door in an outwards direction and allow a larger of people to leave a premise quickly.
The three most common problems that exist are improper installation, poor maintenance, and placement of inappropriate secondary locks. That’s one of the main differences between the single action lock, and a normal panic bar lock is that it’s harder to install and keep up with these kinds of bars. So, if you want this installed in your commercial business then you should do a search on what kind of locksmith can install this at the highest quality that you can’t get anywhere else.
That’s why Panic hardware is so important because it is a door component that is designed to allow fast and easy access to exit a door. There is no expert knowledge needed to know how to use these doors because all someone does to open these doors is to push a rod, a bar or other activators. These types of devices all distinctively function in different ways than a normal door.
Changes in Panic Doors over the years:
Early panic devices were designed as a horizontal pipe or flat bar attached to the door. Each base consisted of a pair of arms that pivot at each side of the bar or pipe, which allows the panic device to operate and then activate a latch retractor mechanism every time it is pushed. There have been a number of injury claims made when these devices aren’t properly maintained by the owner. There actually has been some proof that these locks have resulted in the cause of several severe injuries.
As a result, there have been several changes made to panic devices over the years to help improve the ease of for all ADA compliances and to help improve the safety of the public. The more modern panic device is called a “Crash-Bar”.
Crash Bar’s are made up of a flat integral component that when pushed against, it retracts a latch mechanism. Which is really similar to the older style devices that employed the pie or bar in function.
Different Functions with a Panic Device:
There are several different ways that you can install the panic device so you can use it in the way that makes the most sense for your commercial business. For example, you can make the door become exit only, which is used by a lot of hospitals, museums, and movie theaters. So, people can’t enter through different doors, but there are doors that make it convenient for people who want to leave.
This allows the authorized user to open the door from the exterior side of the opening, to open the door when the key is turned. Reentry is possible with these components only if a movable handle or a handle with a keyed lock cylinder is used and installed on the door.
Another feature that can be added to a panic device is installing into the device to “dog down”, which means make it vertical instead of horizontal. This feature has been used when a panic device is in an area that needs to remain unlatched all of the time. For, an example of a doorway of a restaurant or store where the fire code requires that the premise remains unlocked when the business is open.
One of the most popular panic devices that you see everywhere is a sonic panic device which sounds off an alarm if someone opens it up. These are called Sonic Panic Devices.
As you can see if you own a business in Sandy Springs then it’s probably a good idea to install a panic device and there are locksmiths like Sandy Springs Secure Locksmith that can help you out.